uhu hart model-building glue

DESCRIPTION

PROPERTIES
Crystal clear
For assembling small parts in model building, handicraft and for general use at home
Particularly suitable for balsa wood and wooden materials
Sets as a hard film suitable to reinforce weak areas

APPLICATION
SUITABLE FOR:
Suitable for balsa wood, wood based materials, metal and many types of plastic. For model building.

NOT SUITABLE FOR:
Not suitable for Styrofoam®, PE, PP, PA, POM, PTFE, silicone.

HANDLING
BEFORE USE:
Personal safety
The adhesive contains volatile, highly flammable solvents. Therefore, corresponding safety measures should be take reagrding processing and storage. When gluing ensure adequate ventilation.

Surface requirements
The surface must be dry, clean and free of dust and grease.

DURING USE:
Directions for use
Apply a thin layer to one side. Immediately place the parts together and hold in place. For hard, enclosed surfaces apply a thin layer to both sides, let the adhesive dry, then re-apply to one side, place the parts together and hold in place.

AFTER USE:
Stains/residue
Remove fresh glue stains as soon as possible. Cured adhesive residue can only be removed mechanically.

Storage conditions
Store in tightly closed packaging in a dry, cool and frost-free place.